In the use of sand blasting equipment, if the sand blasting machine is not used properly or does not care about the details of the use of the sand blasting machine, hidden safety risks will occur. Some contents that should be paid attention to when using sand blasting equipment:
First of all, during the installation of the sand blasting machine, the pipes and joints of the sand blasting equipment must be installed firmly to ensure safety and security. When working, you should always check for leaks and damage to the pipeline. The severely worn pipeline should be replaced immediately to prevent the explosion from hurting the surrounding people;
Secondly, during the operation of the sand blasting machine, the spray gun of the sand blasting equipment must not face others;
The third is that in the maintenance of sand blasting equipment, we must pay attention to turning off the air pressure equipment, and we must let out all the air in the air pipe before repairing or replacing parts. When adding abrasives, the compressed air in the cylinder should be exhausted before the top cover can be opened;
Fourth, when sandblasting, the operator should wear a helmet, professional sandblasting work clothes, and special rubber gloves for sandblasting. Especially in the use of mobile blasting machines and open blasting equipment;
Fifth, the air in the blasting helmet of the person who operates the blasting machine must be filtered by a filter, and the air pressure is generally adjusted to 1.2Kg / cm2;
Sixth, the sand blasting machine should clean the sand on the scaffolding and the structure in time, and must pay attention to prevent it from slipping and falling.
The above six points can basically eliminate the safety problems in the use of sandblasting equipment. If you have any good methods or supplements, you can give me your precious suggestions! Above we talked about the safety issues of the sand blasting machine during use. Operation safety is always the first priority. Let me explain the safety issues of the sand blasting equipment in the use process and how to avoid these unsafe problems . First, check the joints of the sand blasting machine. Each joint of the sand blasting equipment (air pipe, yarn tube interface, etc.) must be installed firmly and the connection is reliable. During the operation, the wear condition of the air pipe and the bobbin should be checked frequently. If there is serious wear condition, it must be replaced immediately. The other thing is not to face people during the operation. There is also a need to stop the machine when repairing the blasting equipment, let out the air, and then open the lid. During the process, the operator must wear sandblasting clothing, sandblasting headgear, and sandblasting gloves to prevent accidental damage to the body caused by high-pressure air jets. Other small details should also pay attention to, that is, after sandblasting, you must clean up the sand particles scattered on the ground to prevent slipping and wrestling.