Dongguan Meijun Sandblasting Equipment Production Wholesale Sandblasting Machine Parts , Boron Carbide Nozzle , Sandblasting Gun , Sandblasting Pipe , CLEMCO Air Control Sand Control Valve , Sandblasting Helmet , Sandblasting Suit , Air Control Sand Control Valve , Brown Corundum , Pressure Sand blasting machine , ceramic beads and other products, telephone 0769-82261696 13215392671 We will do our best to serve you!
1. According to the blasting medium and working pressure and temperature, select a suitable blasting hose. Be sure to use abrasion-resistant blasting hose within the recommended temperature and pressure range.
2. The wear-resistant blasting pipe
will expand and contract with its internal pressure. Please cut the wear-resistant blasting pipe to a slightly longer length than you need.
3. When applying pressure, slowly open and close any valve to avoid shock pressure.
4. During use, please keep the hose as straight as possible. If it must be bent, please try to enlarge the bending radius of the wear-resistant sandblasting hose as much as possible. But not less than the minimum bending radius.
5. Use external joints to avoid abnormal wear on the joints of sandblasting pipes.
6. Wear-resistant sandblasting pipe assemblies with electrical continuity requirements need to periodically check the static discharge and discharge of the wear-resistant sandblasting pipe to avoid damage to the hose due to arc perforation.
7. Do not touch the sandblasting pipe
directly or near the open flame.
8. Do not step on the wear-resistant sandblasting hose with a vehicle.
9. The compressed air valve should be opened slowly, and the air pressure must not exceed 0.8MPa.
10. Protective equipment must be worn before work. Bare arms are not allowed to work.
11. Regularly check the use of the blasting pipe
. If you find that the inner rubber layer is seriously worn, the skeleton layer is leaking, and the outer rubber layer is cracked, etc. Click: http://sereio.com/ for more information.