What are the factors that affect the blast cleaning efficiency of pressure blasting machines
Factors that affect the efficiency of blast cleaning include abrasive conditions, operator proficiency, and nozzle material. We will not discuss them one by one here. From the above analysis, it can be seen that, as far as a single independent factor is concerned, the influence on the blast cleaning efficiency of the pressure blasting machine
is very intuitive, but due to the constraints of environmental conditions, it is difficult for various factors to reach the optimal effect.
For example, the diameter of the nozzle should be as large as possible, but from a safety point of view, the human body is prone to fatigue for a long time. In principle, the diameter of the manually operated nozzle should not be larger than 12㎜. In addition, when the air supply of the air compressor is 6m3 / min, If a nozzle with a bore diameter of 12㎜ is selected (at this time, a nozzle with a bore of 10㎜ should be selected), the cleaning efficiency will not only increase, but will decrease accordingly. Therefore, in order to maximize the blast cleaning efficiency of the pressure blasting machine
, it must be comprehensively analyzed and adjusted according to the environmental conditions in which it is located, so as to achieve the best results.
Related searches: Pressure sand blasting machine , sand blasting machine accessories , please visit: http://sereio.com