Sandblasting gun operation safety operation guide
First, before sand blasting work:
1. Wear labor protection articles according to regulations.
2. Check whether the exhaust fan and other machinery are operating normally, whether the electrical control is flexible, and the pipeline is strictly prevented from being blocked.
3. Keep the work room clean, the objects placed neatly, and the aisle unobstructed.
2. Sand blasting work:
1. The sand blasting box is always kept tightly closed to reduce the dust concentration.
2. It is forbidden to talk and laugh at work to prevent dust from entering.
3. During loading and unloading of iron sand, it is not allowed to use cymbals, and appropriate tools must be used, but wet sand is not allowed to be loaded.
4. It is strictly forbidden to eat, drink or smoke in the blasting room.
5. The interior and exterior lighting of the sand blasting machine should be adapted to the working requirements and should not be higher than 36 volts.
6. The air pressure of the incoming air duct shall be maintained in a normal state, and if it is found abnormal, it shall immediately stop.
Third, after the sand blasting work
1. Close the air duct.
2. Clean before work and keep the workplace clean.