Manufacture Standard and Protection of Sandblasted Helmet
Sandblasting helmet is a helmet specially designed for sandblasting. The hard polyethylene shell and the double-layer screen can effectively protect the head, face and eyes from flying objects in the air. It can be equipped with an inner liner W- 8020-2, Window Protector W-8102, Jaw Band W-2913 and Extended Shoulder Cover W-8052 for additional protection.
The sandblasting helmet is made of high temperature resistant material. The special cap shape can effectively protect the firefighter's head, throat and neck. The cap hoop can be adjusted freely within a certain range, suitable for different size head types SCBA masks, explosion-proof flashlights and radio communication systems are used together. Double-layer transparent lenses protect the eyes and face of firefighters.
The sandblasting helmet is designed and manufactured according to the GA44-2004 standard and the European and American standards. It has been listed by the Ministry of Public Security as a personal protective equipment required by firefighters. It has a four-stage shock absorption function design. The impact force on the head is absorbed through the layers, and the impact on the head is reduced to a minimum, so that the head is safely and properly protected. It is comfortable to wear, ventilated and cooled, stable center of gravity, easy to adjust, beautiful in appearance, and durable.
This sandblasting helmet is economical, lightweight and comfortable to wear. It is the first choice for sandblasting helmets. The shell of the helmet is made of glass fiber reinforced plastic, which has good sealing and protection performance. The inner layer of the helmet is a brand safety helmet or sponge compartment (which can effectively reduce part of the noise). After entering the helmet, the gas flows out through the compartment to avoid blowing the head directly and causing discomfort. There is a sponge ring on the neck to isolate the outside, a thick wear-resistant cloth shawl to the waist (similar to short-sleeved vests), and arms can be worn with extended grain sandblasting gloves to protect the arms. According to the size of the actual air supply pipe, it can be replaced with copper joints of various specifications to connect the air supply pipe. It can be used with air filters and thermostats. After installing the air filter, it can filter bad smells, water, oil vapor and rust and For other dust particles, the air temperature regulator uses filtered compressed air as the energy source. After adjusting the handle, you can get moderate temperature and comfortable breathing air. When the compressed air pressure is 0.4-0.7MPa, the adjustment temperature range is 10 ℃ -40 ℃. The sandblasted protective helmet is made of cotton thick canvas, which is durable and has good sealing performance to prevent sand particles from entering the body. The eye mask is made of toughened glass with double-layer protection. It is easy to disassemble. The window glass can be unscrewed without removing the clothing. It can effectively protect the eyes and face from being splashed. It is suitable for: sand field, metal blasting, spraying and other working places.