Meijun high-speed sandblasting gun you deserve
It belongs to long-range high-speed sand blasting gun. Double-inlet sandblasting gun (tungsten steel and boron carbide) is a high-speed type of sandblasting gun. It is a secondary air inlet with two nozzles in front and back. There is a gap between the two. There are eight small holes around the gap. In this large, small, cascading arrangement of nozzles, due to the effect of high-speed airflow, a sufficiently large negative pressure is generated to suck the surrounding air into the nozzle, so that the amount of air ejected is greater than the amount of air entering the nozzle. Compressed air, the exit speed of the abrasive has been increased.
It is a high-speed sand blasting gun that uses compressed air as the power to form a high-speed spray beam, which sprays blasting materials (copper ore, quartz sand, iron sand, sea sand, corundum, etc.) on the surface of the workpiece to be processed at high speed, so that the appearance of the outer surface of the workpiece Changes, due to the impact and cutting effect of the abrasive on the workpiece surface, the workpiece surface has a certain degree of cleanliness and different roughness, and the mechanical properties of the workpiece surface are improved, so the fatigue of the workpiece is increased, and it and coating The adhesion between the layers prolongs the durability of the coating film and is also beneficial to the leveling and decoration of the coating.