⎝⎛叫我棋牌⎞⎠

Welcome to Dongguan Meijun Sandblasting Equipment Store!
Meijun Sandblasting Equipment
Meijun Sandblasting Equipment
Focused on sand blasting machine and sand blasting machine accessories for more than ten years
Pay attention to materials, high quality raw materials, long life
contact details
Meijun Sandblasting Equipment
Product Categories
4News Center
Your location: ⎝⎛叫我棋牌⎞⎠- > News

Operation process of sand blasting equipment


1. Operation procedure before use of sand blasting equipment

Connect the air source and power supply to the liquid blasting machine, and turn on the power switch on the electrical box.

Set the pressure of the compressed air entering the spray gun through the pressure reducing valve between 0.4 and 0.6 MPa as required. When you choose a suitable abrasive injection machine, add sand slowly to prevent blockage.

2. The operation flow during the use of sandblasting equipment. When the sandblasting machine is stopped, the power and air supply of the sandblasting machine must be cut off. Check whether there is any abnormality in each part, and always check whether the connection of each pipeline is firm. Do not drop any items other than the specified abrasive into the work cabin, so as not to affect the circulation of the abrasive. The surface of the workpiece to be processed must be dry.

Note: Never start compressed air with the gun unfixed or held!

3. After using the blasting machine equipment, if you need to stop processing urgently, press the emergency stop button switch, and the blasting machine will stop working. Turn off power and air to the machine.

When the shift is to be stopped, first clean the workpiece and turn off the spray gun switches; use a liquid sand blasting machine to clean the work surface, the inner wall of the sand blasting chamber and the abrasives attached to the mesh plate to flow back to the separator. Turn off the dust removal unit. Turn off the power switch on the electrical box. Finally, talk about how to replace the abrasive of the liquid blasting machine and thoroughly clean the abrasives attached to the work surface, the inner wall of the blasting gun and the mesh plate, and flow it back to the separator. Open the leather plug at the bottom of the sand control valve and collect the abrasive into a container. Add new abrasive to the cabin as needed, but start the fan first.

⎝⎛叫我棋牌⎞⎠ - About Us - Products - Success Stories - Cooperating Clients - Equipment Video - Company Environment - News Center - Industry News - Message - Recruitment - Contact Us
LOGO
Dongguan Humen Meijun Sandblasting Equipment Store Copyright © Copyright 2017 Technical Support: Dongguan Website Construction [ GMAP ]
Address: Building 1-1, Building A, Qihe Industrial Park, No. 33 Xinxing Road, Xinlian Community, Humen Town, Dongguan City. Tel: 0769-82261696 / Mr. Zhong Visits:
* The relevant webpage materials and related resources on this site are from the Internet. If there is any infringement, please inform us quickly. We will delete it within 24 hours. [ Background Management ]
Main: sand blasting machine, water blasting machine, derusting blasting machine, boron carbide nozzle, blasting machine accessories, blasting gun, mobile phone shell blasting machine, aluminum plate blasting machine, Dongguan blasting machine accessories, environmental protection Sand room, Dongguan sand blasting machine, environmental protection sand blasting room [ Baidu Statistics ]
【粤 ICP 备 09153882 号 -1】 【粤 ICP 备 09153882 号 -2】
手机电玩平台 欢乐拼三张 天天电玩城 七乐彩