⎝⎛叫我棋牌⎞⎠

Welcome to Dongguan Meijun Sandblasting Equipment Store!
Meijun Sandblasting Equipment
Meijun Sandblasting Equipment
Focused on sand blasting machine and sand blasting machine accessories for more than ten years
Pay attention to materials, high quality raw materials, long life
contact details
Meijun Sandblasting Equipment
Product Categories
4News Center
Your location: ⎝⎛叫我棋牌⎞⎠- > News

Application range of shot blasting machine on pavement


The shot blasting machine is widely used in surface treatment machinery and equipment, and the road shot blasting machine is a new type of surface treatment equipment specifically for pavement treatment. The application scope of the sand blasting machine equipment factory is mainly as follows Aspects:

1. Surface treatment of concrete bridge deck

European and American countries have widely used waterproofing layers in concrete bridge deck paving since the 1970s, greatly reducing the damage caused by water seepage of concrete bridges and extending the service life of bridges. However, with the increase of traffic volume, the disease that caused by the insufficient adhesion strength of the waterproof layer and the surface layer and the bridge deck occurred at the same time. In China, similar diseases often occur in concrete bridges, as well as concrete looseness, shedding and corrosion of steel bars due to water seepage. One of the reasons for the above diseases is that the treatment of the concrete surface layer did not completely remove the residual material on the surface, and did not retain a certain rough surface to ensure the bonding strength of the waterproof layer and the bottom layer of the bridge deck.

The shot blasting process can clean and remove the slurry and impurities on the concrete surface at the same time. The most important thing is that the surface of the concrete is shaved at the same time to make the surface uniform and rough, which greatly improves the bonding strength of the waterproof layer and the concrete base layer. And in this process, the shot blasting process can fully expose the concrete cracks and other diseases in order to take remedial measures in advance.

2. Tunnel maintenance

In China, cement concrete is generally used for the pavement inside tunnels due to considerations such as waterproofing, material fire resistance and oil resistance. But at the same time, the requirements for the sliding resistance of the long tunnel pavement are also higher. For the above two problems that are still difficult to solve in China, the shot blasting process is a processing method with simple construction, small equipment investment, significant effects and environmental protection.

In recent years, more and more projects using bridge blasting to treat bridge decks and tunnels have been recommended by users. In the concrete pavement waterproofing, shot blasting has been a requirement of European and American national process specifications, and it is gradually being used in China. Accepted, such as Chongqing Tongyu Tunnel, Guiyang Yingpanpo Tunnel, Kunshi Expressway Qingshuigou Tunnel, etc., all use shot blasting technology to maintain the concrete pavement.

3. Maintenance of asphalt pavement

Shot blasting equipment is widely used to improve the roughness and friction coefficient of asphalt pavement, thereby improving the adhesion of the pavement and ensuring driving safety. At the same time, it can also remove the adhesion of asphalt pavement (such as fuel oil, engine oil, etc.). It is mainly used in the following areas:

(1) During the construction of asphalt concrete cover, the pretreatment of the road surface by shot blasting can ensure the cleanliness of the road surface, at the same time increase the roughness of the surface, and strengthen the bonding between the cover layer and the original road surface, and the durability of the structure is greatly Increase; the slurry sealing layer and shot blasting when using a resin material cover can greatly improve the adhesive strength of the resin cover and the original base layer, improve the quality of the slurry seal layer, and extend the service life of the pavement.

(2) The shot blasting process can be used directly on asphalt pavement, for example, brushing the surface of a turning section to improve anti-sliding performance.

(3) It can directly remove the oil on the surface of the asphalt pavement and improve the reduction of anti-slip performance caused by oil on the asphalt.

(4) The shot blasting process can also be applied to the removal of marking lines.

In China, the impact of surface roughness on traffic has not yet attracted widespread attention. However, traffic accidents caused by slippery roads continue to rise every year. Shot blasting equipment can flexibly deal with small areas and completely restore its anti-skid performance.

The asphalt surface treated by the shot blasting process not only cleans up various surface attachments, but also increases the roughness of the asphalt surface and improves the performance of the asphalt pavement. And the equipment construction is simple and convenient, flexible and mobile.

4, steel bridge deck anticorrosive coating

The application of shot blasting technology in anticorrosive coating of steel bridges has been fully affirmed in China. Most of the bridges under construction and under construction choose to use the shot blasting process to clean and roughen the surface before anticorrosive primer or other spraying, such as the Yangtze River Second Bridge, Jiangyin Bridge, Junshan Bridge, Baishazhou Bridge, Shanghai Lupu Bridge and more. The shot blasting process can be used to meet the steel cleanliness requirements of SA2.5 / SA3, and the roughness can be controlled to meet the coating requirements. The entire process is dust-free and easy to move.

5.Clean treatment of municipal roads and paved roads

Various road pavements in the city can be cleaned with a shot blasting machine to remove the markings on the road surface. The road can be roughened at intersections with heavy traffic, which can improve the surface roughness and friction coefficient.

6. Preventive maintenance concrete and asphalt runways for airport runways remove tire tracks (except rubber), remove markings, restore and increase the surface roughness of airport runways, and increase the friction coefficient of runways.

⎝⎛叫我棋牌⎞⎠ - About Us - Products - Success Stories - Cooperating Clients - Equipment Video - Company Environment - News Center - Industry News - Message - Recruitment - Contact Us
LOGO
Dongguan Humen Meijun Sandblasting Equipment Store Copyright © Copyright 2017 Technical Support: Dongguan Website Construction [ GMAP ]
Address: Building 1-1, Building A, Qihe Industrial Park, No. 33 Xinxing Road, Xinlian Community, Humen Town, Dongguan City. Tel: 0769-82261696 / Mr. Zhong Visits:
* The relevant webpage materials and related resources on this site are from the Internet. If there is any infringement, please inform us quickly. We will delete it within 24 hours. [ Background Management ]
Main: sand blasting machine, water blasting machine, derusting blasting machine, boron carbide nozzle, blasting machine accessories, blasting gun, mobile phone shell blasting machine, aluminum plate blasting machine, Dongguan blasting machine accessories, environmental protection spraying Sand room, Dongguan sand blasting machine, environmental protection sand blasting room [ Baidu Statistics ]
【粤 ICP 备 09153882 号 -1】 【粤 ICP 备 09153882 号 -2】
手机电玩平台 欢乐拼三张 天天电玩城 七乐彩