Dongguan Meijun Sandblasting Equipment Production Wholesale Sandblasting Machine Parts , Boron Carbide Nozzle , Sandblasting Gun , Sandblasting Pipe , CLEMCO Air Control Sand Control Valve , Sandblasting Helmet , Sandblasting Suit , Air Control Sand Control Valve , Brown Corundum , Pressure Sand blasting machine , ceramic beads and other products, telephone 0769-82261696 13215392671 We will do our best to serve you! I. Hydraulic requirements
1. The maximum working pressure of the hose is 0.63MPa.
2. When the sand blasting pipe
is subjected to hydraulic experiments at twice the working pressure, it should be free of water leakage, no local bulging, no expansion and no other abnormal phenomena. The antistatic hose should maintain the pressure for 1 minute, and its length should not exceed ± 0.8. %, The change of outer diameter should not exceed ± 10%, and the torsion should not exceed 60 & ordm.
3. The burst pressure of the hose should be no less than 4 times the working pressure. Second, the use temperature
<BR> The use temperature of the hose is -20-45 ℃ 3. Bending performance When the blasting pipe
is tested with a minimum bending radius of 10 times the nominal inner diameter, the deformation KD value should not exceed 0.8 times the outer diameter D of the hose. 4. Conductivity
<BR> The resistance value of antistatic hose should not exceed 2.0MΩ / m. Click: http://sereio.com/ for more information.