High-pressure water blasting machine type I
Type I machine: dry high-pressure sand blasting machine + water mist blasting gun, stainless steel water blasting series
Type II machine: high-pressure water blasting machine, high-pressure water blasting machine room, rust and paint removal and oxide layer cleaning series
Type III machine: high-pressure water jet sand blasting, steel coil steel plate high-speed cleaning water blasting machine, rust and paint removal and oxide layer cleaning series
■ High-pressure water blasting machine, high-pressure water blasting machine room
Ⅰ high pressure water blasting machine:
Dry pressure feed sand blasting machine + environmental protection dust removal water mist blasting gun
Features: The jar is dry sand, and the sand tube is dry sand. It is mixed with water mist only after the gun. It does not affect the installation speed of sand abrasives and has high efficiency. The disadvantage is that the sprayed sand is wet. After recycling, Drying can be used for canning, so this machine is suitable for outdoor use with disposable low-cost abrasives (e.g. river sand, quartz sand, copper ore).
The pressure-feeding mobile sand blasting machine of Dongguan Meijun sand blasting equipment adopts the pressure-relieving pneumatic control mode. The characteristics of this machine:
One person can operate one machine and can independently control the startup and shutdown, saving manpower;
Pneumatic control, linkage exhaust, pressure relief, making the blasting tank stop air pressure to 0, and the pressure during the startup operation does not exceed 6 kg, which is far away from the design pressure of the blasting tank, which changes the hidden safety hazard of pressurization, and at the same time can guarantee The blasting effect of the high-pressure blasting machine is a safe pressure-feeding high-pressure blasting machine;
Adopting the technology of instantaneous exhaust during shutdown, this can ensure that the remaining air pressure in the tank continues to press the abrasive into the sand tube and cause the sand to start up again.At the same time, due to the application of the manual control switch, it is controlled by the operator in the hand, so that the startup and sandblasting Simultaneously, it can effectively control the mixing ratio of high-pressure air and abrasive in the sand tube, reduce the pulse phenomenon, and make the sand blasting very smooth.
Due to the above technical characteristics, the pressure-feeding sand blasting machine of Meijun sand blasting equipment is particularly suitable for long-term sand blasting processing in engineering, and the length of pipeline sand blasting (50 m / 80 m / 100 m). Operating a machine and turning it on and off at any time is controlled by itself, which saves manpower, has the convenience and safety of independent control, and is the first choice for sandblasting engineering construction.