The sandblasting machine produced by Dongguan Humen Meijun sandblasting equipment has a wide range of applications: suitable for sandblasting and rust removal, sandblasting surface cleaning, increasing surface roughness, acrylic surface, matte surface, polishing and deburring, sandblasting engraving, and engraving And other uses.
Its working method is to use computer typesetting to engrav the content to be carved on a sticker with a computer-engraved cutting machine. This adhesive paper is called a sandblasting protective film, and the protective film with the engraved content is affixed to the object to be carved. The surface of the surface is peeled off, and the sandblasting gun is controlled for sandblasting. When the high-pressure air drives the silicon carbide to hit this part, the effect is like hitting this part by hand with tens of thousands of sand-sized chisels at the same time. If the film is soft, the hard part will bounce off when it is soft.
The depth of engraving depends on your processing requirements. The length of time the spray gun stays determines the depth of engraving. If you want to engraved deeply, just spray more in the place where you need to engraved. There is no difficulty in this technique. Normal people can do it in a few minutes without any foundation. The sculpted content is the same as that discharged from the computer. It is neat and beautiful, not deformed, and not distorted. Low engraving cost and high speed. Generally, the cost of one square engraving material is about 12-20 yuan, including protective film, electricity, and emery. The engraving speed is fast, such as engraving a 3 cm large 2 mm deep child. Just a few seconds. This is incomparable with traditional manual and other CNC tool carving methods.
Sand blasting stone engraving machine has a wide range of applications. Whether it is marble, stone, tombstone, ceramics, glass, etc., it can be engraved. Therefore, some industries in different places are also called stone engraving machines, sand blasting tombstone engraving machines, and glass sand blasting. Engraving machine.
Sand blasting is a engraving method that uses high-pressure air to drive abrasives such as silicon carbide to hit the surface of the stone at high speed, so as to achieve the engraving effect. It uses a lettering machine to engrav the content to be engraved on self-adhesive paper, uses self-adhesive paper as a sandblasting protective film, attaches the protective film with the engraved content to the surface of the object to be engraved, and removes the content to be engraved Control sandblasting gun for sandblasting engraving.
Stone engraving machine is to fix the stone to be processed on the engraving machine. Then, through the computer-generated engraving program, the cutter of the engraving machine is controlled to complete the engraving of characters and patterns.