Carving sand blasting machine
The principle of sand blasting carving is to use high-pressure air sprayed from the nozzle opening concentrated on the diameter of 3-10 mm to drive the abrasive of emery (including brown corundum, white corundum, steel sand, etc. with diamond horns) against the surface of stone or glass at high speed, Hollow out the sprayed object to achieve the purpose of carving.
Operation process of sand blasting:
Use computer typesetting CAD, photoshop and other plane processing software to engrav the graphics, text, LOGO and other content to be engraved on the adhesive paper (sandblasted protective film) by a computer engraving and cutting machine, just like a roadside advertising shop for advertising The words are just the words in the advertising store. The unnecessary parts are removed and the words are left. The sandblasting is the opposite. The protective film with the engraved content is affixed to the surface of the object to be engraved. The word you want to sculpt, control the blasting gun to sand sculpt the hollow part.
When the high-pressure air drives the emery to hit this part, the effect is like tens of thousands of -96 grit large chisels hit this part, hard and hard, the part that needs to be carved is removed, forming a text or pattern, and vice versa When it is protected by the film, because the film is soft, it will bounce out when it meets the soft, and the objects under the protection film are intact.
The depth of the engraving is determined by the processing requirements, and the length of the spray gun stay determines the depth of the engraving. If you want to make a deep engraving, spray it in the deep place you need to engraved. That's it. This technology has no difficulty. Generally, it will take a few minutes for normal people, without any foundation. The same, neat and beautiful, not deformed, not distorted.
The cost of engraving is low. Generally, the cost of one square engraving material, including protective film, electricity, and emery, is about 12-20 yuan.
The engraving speed is fast, such as engraving a character that is 3 cm large and 2 mm deep, which only takes a few seconds. This is incomparable with traditional manual and other CNC tool carving methods.
Sand blasting stone engraving machine currently has several models of high-pressure mobile open, high-pressure recycling recovery, siphon fixed box type, suction mobile recycling recovery models, users should choose according to their needs and processing requirements, economical and affordable High efficiency is the pressure type mobile sand blasting machine (open type), such as the 400 type pressure engraving sand blasting machine produced by our company, using 5-6 centimeters high wear-resistant boron carbide nozzle and inner diameter 13-19mm cord winding cloth The grain surface high-pressure wear-resistant sand blasting machine can be equipped with pneumatic control or electric control according to the requirements of the operating environment. It is easy to use and economical. Welcome to consult!
Company Name: Magin Dongguan Humen Meijun Sandblasting Equipment Store Tel: 0769-82261696 13215392671
Address: No. 33 Xinxing Road, Xinlian Community, Humen Town, Dongguan City http://sereio.com